CHIAH CHYUN MACHINERY CO., LTD.
CT3 can perform complex machining faster and more economically in one setup.
Whether you produce complex or simple parts at high production rates, CT3 with twin spindle and three turrets offers unbeatable versatility. This machine consists of three 16-position servo turrets that will dramatically upgrade machining efficiency and maximize productivity.
Three Turret
CT3 consists of three 16-position servo turrets that will dramatically upgrade machining efficiency and maximize productivity.
Oil Mist Lube System
The oil mist lube system provides lubrication oil for the gears in the turret, that supply for reducing the mist continuously and lower the temperature of gear.
Built-in Type Spindle
The built-in spindle performing short accelerate/decelerate time and low vibration characteristic, it provide high precision and high efficient capability.
Optional Accessories:
CT3 | |||
Item | CT3-52Y2M | CT3-76Y2M | |
Capacity | |||
Controller | Mitsubishi | Mitsubishi / Fanuc | |
Max. Manu. Dia. | Ø360 mm | ||
Standard Manu. Dia. | Ø210mm | ||
Swing over Bed Dia. | Ø830mm | ||
Distance Between Two Center | 1045 mm | ||
Max. Manu. Length | 310 mm | 285 mm | |
Bar Capacity | Ø51 mm | Ø76 mm | |
Axis Specifications | |||
B-axis travel | 775 mm | 655 mm | |
Z1, Z2, Z3 Axis Travel | 310 / 250 / 440 mm | 252 / 250 / 382 mm | |
X1, X2, X3 Axis Travel | 227.5 / 227.5 / 230 mm | ||
Y1, Y2 Axis Travel | ±50 / ±50 mm | ||
X, Y, Z Axis Rapid Travel Speed | 16 / 6 / 40 m/min | ||
B Axis Rapid Travel Speed | 40m/min | ||
Min. Input Unit | 0.001 mm | ||
Spindle | |||
Spindle Bar Capacity | Ø51 mm | Ø76 mm | |
Spindle Max. rpm | 6000 rpm | 4000 rpm | |
Spindle Motor | M: 7.5 / 11 kw F :11 / 15 kw |
M: 15 / 22 kw F:18 / 22 kw |
|
Center height | 1188 mm | ||
Spindle Nose | A2-5 | A2-6 | |
Spindle Bore | Ø60.5 | Ø88 mm (Op:Ø86 mm) | |
Spindle Bearing Dia. | Ø90 | Ø120 mm | |
Chuck Size | 6”(Option 8”) | 8”(Op: 10”) | |
Sub spindle | |||
Spindle Bar Capacity | Ø51 mm | Ø65 mm | |
Spindle Max. rpm | 6000 rpm | 4000 rpm | |
Spindle Motor | M: 7.5 / 11 kw F: 11 / 15 kw |
M: 7.5 / 11 kw F: 18 / 22 kw |
|
Spindle Nose | A2-5 | A2-6 | |
Spindle Bore | Ø60.5 | Ø88 | |
Chuck Size | 6”(Option 8”) | 8”(Option 10”) | |
L.R.C | |||
Min. Moving Unit | 0.001° | ||
C Axis Rapid Travel Speed | 600min-1 | ||
Live tool turret | |||
Turret Station | 16-station | ||
Square Tool | ![]() |
||
Round Tool | Ø25mm | ||
Rotating Mode | Single Tool Transmission | ||
Live Tool rpm | 60~6000min-1 | ||
Live Tool Motor | 3.7/5.5kw | M: 3.7 / 5.5 kw F:4.5 kw |
|
No. of Live Tool | 16×3 | ||
Collet Size | ER Ø32 | ||
Tool Holder & Tool Size | BMT65 | ||
Power | |||
Power | 93KVA | (M:107,F:120)KVA | |
Hydraulic motor | 5HP / 3.7kw | ||
Coolant Motor | 1HP / 0.75kw | ||
Tank capacity | |||
Hydraulic Tank | 48L | ||
Coolant Tank | 305L | ||
Machine | |||
Size (LxWxH) (Includes Chip Conveyor) | 4327x2335x2164 mm | ||
Machine N.W.(includes chip conveyor) | 11100 kg | 11200 kg |
※ M: Mitsubishi Controller F: Fanuc Controller
* Design and specs subject to change without notice.
Standard Accessories | ||
Tool Kit & Box | Collet Chuck Device | Auto Bar Feeder Interface |
Finished Parts Gripper & Conveyor | Chip Washing Coolant Device & Air Blowing Device -Cutting Fluid Pump -Cutting Fluid Inspection Device -Coolant Through Sub Spindle |
Auto Power Breaker |
Air Conditioner For Electrical Cabinet | Steel Belt Chip Conveyor | Double Boring Bar Holder (CT2 x 2 / CT3 x 3) Single Boring Bar Holder (CT2 x 8 / CT3 x 12) Cut Off Tool Holder x 1 OD Tool Holder (CT2 x 10 / CT3 x 14) Radial Slotting Tool Holder (CT2 x 2 / CT3 x 3) Tool Sleeve (Ø6, 8, 10, 12, 16, 20) (CT2: 4 Pcs of Each / CT3: 6 Pcs of Each) |
Options | ||
6” / 8” Hydraulic Chuck | Axial And Radial Live Tool Holder | Voltage Stabilizer |
15-Bar High Pressure Coolant Device With Filter | Spindle Chiller Device | Bar Feeder |
Oil Mist Collector | Automatic Door Device | Mitsubishi Robot |
Gantry System | – | – |